Buy - Sell - Swap
ITEMS FOR SALE
Touch marks for sale:
Superior Steel
The Superior Steel Stamp Co.
1242 East 49th St., Ste. 401
Cleveland, Ohio 44114-3851
Tel: (216) 431-6460
Dale Cashin (Vice President)
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
L Brand” Items
L Brand”® is offering single ton (40-50 LB Bags) shipments of coke for sale:
This truck can deliver to New Mexico and Arizona on the I-10 corridor.
California deliveries can be made from San Diego up to San Francisco and
ending in Reno.
the truckload price of $515.00 ($495.00 if paid by check or money order).
Delivery can be made at any location that can accommodate a full size
flat bed truck. A commercial address or forklift is not required.
The minimum order is one ton (2,000 LB).
Credit cards will not be charged until the business day prior to shipment.
Checks will be cashed on the business day prior to shipment as well.
Orders will be accepted until the truck is full.
Package is 40-50 LB cloth bags on a black plastic covered pallet. The black
plastic cover extends the time “L Brand”® can be stored in the sun.
To place an order, or for more information call 678-360-3521. Visit our web
at L Brand”® Coke
Ed Avolio, Owner,
1155
Settles Pointe, Suwanee, GA 30024-4270
Phone 678-360-3521.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Dennis Murrell's items
Here are photos and discriptions of the equipment Dennis Murrell has to sell.
1. Layout/fab table 5'x10'x1/2" Adj. ht $3500 Click here for a picture.
2. Post vise - Peter Wright, 6 1/2"jaws, 100lbs $1500 Click here for a picture.
3. Gun Barrel Swage Block- 15"x15"x4 5/8" 125lbs $250 Click here for a picture.
4. Upsetting block - 12"x12"x4" 125 lbs $50 Click here for a picture.
5. Roper Whitney Shear - 2"x2"x1/4" max new $200 Click here for a picture.
6. Grind stone on seated frame 2"x22" $400 Click here for a picture.
7. Hand Crank Drill Press $100 Click here for a picture.
Dennis' shop address is: Unit 1C, 1203 King Drive, Taos, NM
Because Dennis does not have a phone anyone can call Tom Ervin at home at(575)758-9686
or Tom's cell at (575) 779-1987
or Tom can be emailed at paulae516@gmail.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
A buffalo forge, rectangular, about 2.5' x 3', sheet metal frame with
round cast iron firepot and triangular clinker breaker. It is made to be
used with the bed lined with firebrick which he has to go with it. This is
a good sized shop forge and the firepot looks to be in great shape! It
comes with the original hand crank blower and a pair of tongs and a hot cut
and a couple of misc other tools. $400.00
A home built forge, large but seriously rusted up. It has an
electric Buffalo blower on it that looks in decent shape. $100.00
Note: John also casts babbitt as part of his machine work on old cars.
John may be reached through Pete's Machine Shop (505) 836-3110
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
John Cosper 's items
A buffalo forge, rectangular, about 2.5' x 3', sheet metal frame with
round cast iron firepot and triangular clinker breaker. It is made to be
used with the bed lined with firebrick which he has to go with it. This is
a good sized shop forge and the firepot looks to be in great shape! It
comes with the original hand crank blower and a pair of tongs and a hot cut
and a couple of misc other tools. $400.00
A home built forge, large but seriously rusted up. It has an
electric Buffalo blower on it that looks in decent shape. $100.00
Note: John also casts babbitt as part of his machine work on old cars.
John may be reached through Pete's Machine Shop (505) 836-3110
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Brent Bailey's items
Brent Bailey is looking to sell his 25# little Giant(New style).
2 hp single phase motor
Completely rebuilt, excellent condition, new paint, dies, die keys & pins. Asking $3200
If you are interested, or have questions, please contact Brent Bailey directly:
Brent is located near Chico, Ca.
Brent Bailey Forge and tool Co
530 865-4176
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Frank Turley's items
Frank Turley has a colonial anvil (made in England) for sale. It has the handling holes, a hardie hole and a
slender horn. Weight 78lbs.
George Washington may have used it! $350.00
Click here for a picture of the back of the anvil.
Click here for a picture of the front of the anvil.
Click here for a picture of the side of the anvil.
Antique blacksmith's bickern (beak iron), sometimes called a stake anvil. Both horns droop a little
from use over the years. There is some mushrooming on the central face edges. It has the octagonal shank and a
pyramidal spike on the bottom. Rust patina. Overall height 20 3/4" and overall length pyramidal horn tip to conical
horn tip, 19 1/2". asking $200.00.
Large unused Pexto Brand bench shear. It is the old armourer's style used for sheet metal. It has a bend in one
handle made to be fitted and inserted in a hole on the bench or table top. Asking $35.00
Antique double-acting Great Bellows beautifully shop-made. Needs a small piece of wood repair, valve repair, and
new leather. All nails are well made and broad headed. All hardware of wrought iron. Wooden portion 59" long by 33"
wide. The wrought tuyere nose is 12" long.
Pick up in Santa Fe, only. $250.00
Contact Frank Turley for details on any of the above at 505-471-8608 -OR-
email him at frank@turleyforge.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
SWABA's items
Joe Whiton donated a cavalry forge to SWABA when he stopped blacksmithing. SWABA has no place to
properly store this item so the decision has been made to put the forge up for sale.
Cavalry forge - $400.
Contact Larry Kern for details on above at 505-228-4412 or
email Larry at larryskern@comcast.net
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Robb Gunter's items
Edwards Shear #5 completely restored, painted and new blades for sale $350.00
244# Peter Wright anvil fully restored - $850.
Cavalry forge - $400. with replacement legs.
Post vise 5" jaws, $150
Rose petal set blanks for sale
Right sided hardies for 1" hardy hole for sale $25.00
3/4" and 7/8" also available upon request
Coal for sale! Robb has coal crushed and bagged - $12.00 for 50lb bag
Contact Robb Gunter for details on any of the above at 505-281-8080
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
James R. Johnson's items
James writes:
I have been a full time blacksmith for over 12 years and have recently become the exclusive distributor
for Anyang Power Hammers. I have four Anyang hammers (and a Little Giant) in my shop and use them on
a daily basis. I have found the hammers to be extremely controllable, reliable, and affordable.
I have just purchased the inventory of Anyang hammers and spare parts from the estate of the prior
distributor and have a good supply of hammers, dies, and spare parts… (and more on the way).
I also have several older hammers that are new, in the crate, that I can give a special deal to any
of your members.
Click here to visit the Anyang USA web site
Click here to visit James' web site
You can telephone James at 940-627-4529 or
email him at james@johnsonmetalsmithing.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
John Tiesher's items
1 Peter Wright Anvil "Solid Wrought" Approxamately 120#
Has 1" or 7/8" hardy hole and a 5/8" Pritchel hole - has chipped edges - asking $400.00
Click here for a picture of the anvil.
Contact John Tiesher for details on any of the above at 505-803-3524
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
ITEMS WANTED TO BUY
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Tim Mings' items
I am interested in buying blacksmith art at wholesale prices to sell at my business in Belen.
The name of my company is Belen Express Recycling. We are a full service scrap metal recycling facility.
As a way to supplement income, I would like to display and sell metal art.
My kids and I have always enjoyed your blacksmith "booth" at the State Fair and I believe that similar pieces would
sell well at my company.
Belen is a ranching and railroad community so pieces with those themes would do well.
Also metal puzzles would work. I would be primarily interested in pieces in the $5-$15 range.
Contact: Tim Mings for more details on the above at 505-864-8760 or
email Tim at tsmings@aol.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[HOME]
If you wish to list items on this page then
E-Mail us at: swabawebmaster@comcast.net